Fluid Control Accessories – Drains

Best cost-benefit in drainage.

A steel hydraulic tensioner nut with a thread inside and a sleek, polished exterior, designed by an industrial gasket solutions provider in Baton Rouge.THERMODYNAMIC DRAINS
thermodynamic steam trap is a robust, low-cost option for condensate drainage in steam distribution lines.
A close-up image of a metal mechanical component with hexagonal sections and a screw port, highlighted against a white background, suitable for tailored fluid monitoring solutions. THERMODYNAMIC DRAINS – UNIVERSAL CONNECTOR
This thermodynamic steam trap has coupled universal connector allowing the withdrawal of the trap without the need for intervention in the pipe.
A stainless steel calibration weight with a threaded hole, consisting of two cylindrical parts stacked in decreasing size, offered by a leading valve distribution company in Louisiana.THERMOSTATIC STEAM TRAPS
Thermostatic steam traps are recommended for systems with low condensate flow or where the desired temperature of the heated fluid is less than 80 ° C.
A black cast iron swing check valve with threaded female connections on a white background. The valve body, supplied by an industrial supply company in Louisiana, is sturdy and embossed with markings and numbers. FLOAT STEAM TRAP
The float steam trap line is a cost-effective option for draining large condensate flow equipment.
An industrial gasket solutions provider in Baton Rouge offers a black plastic water filter housing with a cylindrical shape and a round cap on top, isolated on a white background.DRAINS INVERTED BUCKET
Inverted bucket steam trap are mechanically actuated by the presence of condensate or steam and can be used both in distribution drain line as heat exchange equipment.
A metal y-shaped pipe with flanges at both ends, marked with "wc b2" and "epano 201100 351" on its body, isolated on a grey background, available

OTHER ACCESSORIES FOR CONTROL OF FLUIDS

AIR ELIMINATOR
FILTERS