INTEC HIGH-PRESSURE BALL VALVES

High-pressure ball valves of the modular INTEC system technology!

High presision bearings and single or both sides spring loaded seat ring elements are responsible for a safety handling in all applications of the high pressure ranges. Equipped with all advantages of series INTEC K200. Two-piece split body or three-piece split body design. Extreme long-life acc. high precision bearing of the stem. Optimized arrangement of the bearing forces.

INTEC K211 – Flanged ball valve
  • DIN design:
    DN 40 – DN 300  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1 1/2″ – NPS 12″  /  Class 600, 900, 1500
  • Two-piece split body
  • Trunnion mounted ball
  • Metal seated
  • Both sides spring loaded seat rings
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +400°C
INTEC K214 – Flanged ball valve
  • DIN design:
    DN 40 – DN 500  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1 1/2″ – NPS 20″  /  Class 600, 900, 1500
  • Two-piece split body
  • Trunnion mounted ball
  • PEEK seated
  • Both sides spring loaded seat rings
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +260°C
INTEC K231 – Flanged ball valve
  • DIN design:
    DN 15 – DN 300  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1/2″ – NPS 12″  /  Class 600, 900, 1500
  • Two-piece split body
  • Trunnion mounted ball
  • Metal seated
  • Single side spring loaded seat ring, free outlet
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +400°C
INTEC K234 – Flanged ball valve
  • DIN design:
    DN 15 – DN 500  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1/2″ – NPS 20″  /  Class 600, 900, 1500
  • Two-piece split body
  • Trunnion mounted ball
  • PEEK seated
  • Single side spring loaded seat ring, free outlet
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +260°C
INTEC K811 – Flanged ball valve
  • DIN design:
    DN 15 – DN 25  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1/2″ – NPS 1″  /  Class 600, 900, 1500
  • Two-piece split body or three-piece split body
  • Trunnion mounted ball
  • Metal seated
  • Both sides spring loaded seat rings
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +225°C
INTEC K814 – Flanged ball valve
  • DIN design:
    DN 15 – DN 25  /  PN 63, 100, 160, 250
  • ANSI design:
    NPS 1/2″ – NPS 1″  /  Class 600, 900, 1500
  • Two-piece split body oder three-piece split body
  • Trunnion mounted ball
  • PEEK seated
  • Both sides spring loaded seat rings
  • Top flange DIN EN ISO 5211
  • Full bore
  • Temperature up to +225°C
End connections / Face to face dimensions
  • DIN design:
    FTF dimensions acc. to EN 558, GR.1, GR.2, GR.27  /  Flanges acc. to EN 1092
  • ANSI design:
    FTF dimensions acc. to ANSI B 16.10  /  Flanges acc. to ANSI B 16.5
Materials
  • Special materials like Duplex, Super Duplex, Hastelloy B2/C4/C276, Titanium, Zirconium, Monell, Nickel etc.

General Information

The specified pressure and temperature values showing the maximum range for orientation only. For the necessary design please note the pT diagram in the respective data sheet. Main criterion of the material code is the basic material of body and cap. The performance and service life of KLINGER valves depend to a large extent on proper storage and fitting – factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our operating instructions.