Klinger Fluid Control Products: Innovative Ball Valve Solutions
Ball valves are modern shut-off valves which are very reliable in operation.
KLINGER BALL VAVLES
Reliably sealed – inside and out
Ball valves are modern shut-off valves which are very reliable in operation. The circular bore guarantees a flow characteristic which is similar to a pipe. As there is no shut-off device in the flow, ball valves with full bore are piggable without any problems.
Due to the usage of standardised mounting flanges, the optimizing of operating torques and the high compatibility to different actuator designs and makes, our ball valves keep up with the increasing of automated production processes and the requirement of remote-controlled industrial facilities.
KLINGER Fluid Control offers five product ranges of ball valves which differ in three main features: nominal width range, construction and available end connection. The table below provides an overview on the available product ranges:
Product overview ball valves:
- Hot water, steam and heat transfer oils: in power plants and district heating supply.
- Viscous media: e.g. bitumen (petroleum industry and refineries), molasses (breweries)
- Liquid and gaseous media in refineries and tank farm construction (hydrocarbons, fuels and oils)
- Liquid gas and natural gas
- Compressed air supply in industry
- Dusty media: cement in plants and on silos
- In the paper and textile industry: dye liquor, cooking liquor
- In the chemical industry: acid-resistant ball valves for chemical solutions (acids, bases, etc.)
Product details
Ball valve series | DN | Design | Connection types |
---|---|---|---|
Ballostar KHA | DN 10-125 | 3-piece | Flange, socket, weld end |
Ballostar KHE | DN 15 – 200, ½“ – 8“ | 2-piece | Flange |
Ballostar KHI | DN 150-1000 | 2-piece (optionally fully welded) | Flange, weld end |
Monolith KHO | DN 25-300 | One piece, fully welded, solid for installation below ground | Weld end |
Monoball KHM | DN 15-150 | One-piece, fully welded | Flange, socket, weld end |